CHAPTER X
MEASURE
97. From the standpoint of the eye, a _measure_ is that portion of the staff found between two bars, (in certain cases this space may be less than a measure, as _e.g._, at the beginning and end of a movement); but from the standpoint of the ear a single, isolated measure is not possible, and the term must therefore be defined in the plural form.
_Measures_ are similarly accented groups of evenly-spaced beats, each group having at least one accented and one non-accented beat. The strongest accent falls normally on the first beat in the measure.
Two essential characteristics are involved in the ordinary musical measure:
(1) A group of even beats (or pulses), always felt, though not always actually sounded, one or more of these beats being stronger than the rest;
(2) Certain rhythmic figures ([Illustration], etc.) which form the actual musical content of these groups.
The student will note the essential difference between rhythm and measure. Rhythm is the regular recurrence of accent in a series of beats (or pulses), while measure is the grouping of these beats according to some specified system. In listening to a piece of music, two hearers A and B may feel the _rhythm_ equally strongly, but A may subjectively group the beats into--_one_, two | _one_, two |--etc., while B feels the groups as--_one_, two, _three_, four | _one_, two, _three_, four |--etc. Rhythm is thus seen to be a fundamental thing, inherent in the music itself, while measure is to a certain extent at least an arbitrary grouping which musicians have adopted for practical purposes.
98. In _syncopation_ the normal system of accenting is temporarily suspended and the accented tone falls on the regularly unaccented part of the measure. Syncopation may therefore be defined as the temporary interruption of a normal series of accents, _i.e._, accenting a beat that is usually not accented. Thus _e.g._, in Fig. 56, measure _one_ has the regular system of accents normally found in four-quarter-measure, (strong accent on one, secondary accent on three); but measure _three_ has only one accent, and it falls on the second beat.
[Illustration: Fig. 56.]
99. Measures are usually classified as _simple_ and _compound_. A _simple measure_ is one which has but a single accent, _i.e._, the measure cannot be divided into smaller constituent groups. There are two main classes of simple measures, two-beat measure, and three-beat measure. A _compound measure_ is (as its name implies) one made up by combining two or more simple measures, or by the elaboration of a single measure (in slow tempo) into several constituent groups. The principal compound measures are four-beat and six-beat, both being referred to as compound-duple measures. Five-beat, seven-beat, nine-beat, and twelve-beat measures are also classified as compound measures.
An English writer[23] classifies measures as duple, triple, or quadruple, specifying that a simple measure is one in which each beat is represented by a note whose value can be divided into halves ([Illustration] etc.) and that a compound measure is one in which each beat is represented by a dotted-note, whose value can be divided into three parts, ([Illustration]). There is thus seen to be considerable difference of opinion as to the meaning of the words _simple_ and _compound_ when applied in this connection, the principal question at issue being whether four-beat measure is an individual variety, or whether it is a variety compounded out of two-beat measures, either by placing two of these in a group or by the elaboration of a single measure into a larger number of beats, as is often necessary in slow tempi. Perhaps the easiest way out of the difficulty is to admit that both may be true--but in different compositions. That is, it is frequently impossible to tell whether a composition that is being listened to is in two-beat, or in four-beat measure; and yet it _is_ sometimes possible so to discriminate. Since, however, one cannot in the majority of cases distinguish between two-beat and four-beat measures, it will probably be best to leave the original classification intact and regard four-beat measure as a compound variety.
[Footnote 23: Pearse--Rudiments of Musical Knowledge, p. 37.]
100. The _commonest varieties of measure_ are:
1. _Duple_ (sometimes called even measure, or even time), in which there are two beats, the first one being accented. Examples of duple measure are 2/4, 2/8, 2/2, two-quarter,[24] two-eighth, and two-half measure, respectively.
[Footnote 24: For explanation of terminology, see p. 48, Sec. 106.]
2. _Triple_, (the old perfect measure), in which there are three beats, the first one being accented, the second and third unaccented. Examples are 3/8, 3/4, 3/2, three-eighth, three-quarter, and three-half measure, respectively.
3. _Quadruple_, in which there are four beats, the first and third being accented (primary accent on _one_, secondary accent on _three_), the second and fourth unaccented. (See note above, under Sec. 99.)
4. _Sextuple_, in which there are six beats, the first and fourth being accented, the others not. In rapid tempi this is always taken as compound duple measure, a dotted quarter note having a beat. It will be noted that the two measures [Illustration] are identical in effect with [Illustration].
101. Other varieties of measure sometimes found are 9/8 and 12/8, but these are practically always taken as three-beat and four-beat measures respectively, being equivalent to these if each group of three tones is thought of as a triplet. [Illustration] is identical in effect with [Illustration].
102. _Quintuple_ (five-beat) and _septuple_ (seven-beat) measures are occasionally met with, but these are rare and will always be sporadic. The five-beat measure is taken as a combination of three and two, or of two and three (sometimes a mixture of both in the same composition), while the seven-beat measure is taken in groups of four and three, or of three and four.
103. The sign [common-time symbol] is usually understood to mean four-quarter measure, and the sign [cut-time symbol], two-half measure, but usage varies somewhat, and the second sign is sometimes used to indicate four-half measure. It may safely be said however that the sign [cut-time symbol] always indicates that a half-note has a beat. [Double cut-time symbol] may occasionally be found indicating four-half measure but this is rare.
The student will note that the sign [common-time symbol] is not a _letter_ C, but an incomplete circle, differentiating two-beat (imperfect) measure from three-beat (perfect) measure. See Appendix A, p. 106. [Transcriber's Note: page number missing in original.]