Part 17

The four =metatarsal bones= resemble the corresponding bones of the fore limb, but are somewhat longer. The proximal ends of the third and fourth each have a considerable projection behind; the process on the third has a facet for articulation with a discoid sesamoid bone. The second and fifth are placed more on the posterior aspect of the large bones than is the case in the fore limb.

The first and second =phalanges= are a little longer and narrower than those of the fore limb.

SKELETON OF THE DOG

VERTEBRAL COLUMN

The vertebral formula is C_{7}T_{13}L_{7(6)}S_{3}Cy_{20–23}.

The =cervical vertebræ= are relatively longer than in the ox and the pig. The bodies of the typical vertebræ diminish in length from first to last and are compressed dorso-ventrally. The anterior extremity is moderately convex and the posterior slightly concave; both are oblique. The median ridge and lateral grooves on the upper surface of the body are very well marked. The second, third, and fourth have distinct ventral spines. The spinous process of the third has the form of a long low crest; in the remainder it is higher, blunt-pointed, and inclined forward. The transverse processes of the third, fourth, and fifth project downward and backward, and divide into two branches; of these, the anterior one is thin, and the posterior is thick and tuberculate at its free end. The process of the sixth has two parts; one of these is an extensive quadrilateral plate directed downward and outward and ridged on its inner surface; the other part is short and blunt, and is directed outward and a little backward and upward. The seventh is readily distinguished by its shortness, the length of its spine, and the single transverse process. The posterior articular processes bear tubercles which are large on the third, fourth, and fifth.

The ventral arch of the =atlas= is narrow from before backward, and bears a small tubercle posteriorly. The upper surface of the dorsal arch is strongly convex and rough centrally. The wings are wide, flattened, and almost horizontal. The upper surface is rough. There is an alar notch (Incisura alaris) on the anterior border instead of the anterior foramen. The foramen transversarium is present.

The body of the =axis= is flattened dorso-ventrally, especially in front. The odontoid process is rounded and relatively long, reaching almost to the occipital bone; it is inclined upward a little. The articular surfaces which flank it are condyloid in form and very oblique. The inferior surface is wide, and is divided by a median crest into two fossæ. The transverse processes are single, pointed, directed backward and outward, and perforated by relatively large foramina transversaria. The spinous process is thin and of moderate height, but very long; it is prolonged forward so as to overhang the dorsal arch of the atlas, and is terminated behind by a tuberosity which is connected by two crests with the posterior articular processes. The anterior notches are large and are never converted into foramina.

The bodies of the =thoracic vertebræ= are wide and compressed dorso-ventrally, especially at each end of the region. Their convex anterior surfaces are depressed in the middle. The posterior facets for the heads of the ribs are absent on the last three or four. The transverse processes resemble those of the horse. They bear mammillary processes except at the anterior end of the region. The facets for the tubercles of the ribs are large and concave in the anterior part of the series, and become smaller and slightly convex further back. The last three have accessory processes also. The first three or four spinous processes are about equal in length. Behind this they become gradually shorter to the tenth, and then remain equal. The backward slope is most marked in the ninth and tenth. The eleventh is practically vertical (anticlinal vertebra) and the last two incline slightly forward.

The bodies of the =lumbar vertebræ= are decidedly flattened dorso-ventrally, and increase in width from first to last. The length increases to the sixth. The transverse processes are plate-like and are directed forward and downward. Their length increases to the fifth and sixth. They form no joints with each other or with the sacrum. Their extremities are enlarged, with the exception of the last. The accessory processes project backward over the posterior notches of the first five. The anterior articular processes are large, compressed laterally, and bear mammillary processes. The spinous processes are broad below, narrower above, and with the exception of the last, incline a little forward. Their height diminishes behind the fourth.

[Illustration:

FIG. 115.—SKELETON OF DOG, LATERAL VIEW.

_a_, Cranium; _b_, face; _c_, mandible; _1H-7H_, cervical vertebræ; _13B_, last thoracic vertebra; _1L-7L_, lumbar vertebræ; _K_, sacrum; _S_, coccygeal vertebræ; _1R-13R_, ribs; _R.Kn._, costal cartilages; _St._, sternum; _d_, scapula; _d′_, supraspinous fossa; _d″_, infraspinous fossa; _1_, spine of scapula; _2_, acromion; _3_, tuberosity of scapula; _3′_, articular end of scapula; _e_, humerus; _4_, head of humerus; _5_, external tuberosity of humerus; _5′_, deltoid ridge; _6_, _6′_, epicondyles of humerus; _7_, external condyloid crest; _7′_, coronoid fossa; _f_, radius; _g_, ulna; _8_, olecranon; _9_, “beak” of ulna; _h_, carpus; _i_, metacarpus; _k_, proximal phalanges; _l_, middle phalanges; _m_, distal phalanges; _n_, sesamoid; _p_, ilium; _10_, wing of ilium; _11_, shaft of ilium; _12_, crest of ilium; _13_, external angle of ilium (tuber coxæ); _14_, internal angle of ilium (tuber sacrale); _15_, superior ischiatic spine; _q_, pubis; _r_, ischium; _16_, tuber ischii; _17_, acetabulum; _s_, femur; _18_, head of femur; _19_, trochanter major; _20_, trochanter minor; _21_, trochanter tertius; _22_, _23_, condyles; _24_, _25_, epicondyles; _26_, trochlea; _t_, patella; _u_, tibia; _27_, tuberosity of tibia; _28_, _29_, condyles of tibia; _30_, internal malleolus; _v_, fibula; _31_, external malleolus; _32_, head of fibula; _w_, tarsus; _x_, metatarsus; _y_, phalanges; _33_, occipital bone; _34_, paramastoid (styloid) process; _35_, parietal bone; _36_, frontal bone; _37_, lacrimal bone; _38_, malar bone; _39_, squamous temporal; _40_, maxilla; _40′_, infraorbital foramen; _41_, premaxilla; _42_, nasal bone; _43_, external auditory meatus; _44_, canine tooth; _45_, masseteric fossa; _46_, angular process of mandible. (After Ellenberger, in Leisering’s Atlas.) ]

The =sacrum= results from the early fusion of three vertebræ. It is short, wide, and quadrangular. The spines are fused to form a median crest, which is notched, however, between the summits of the spines. On either side are two tubercles, vestiges of the fused articular processes. The pelvic surface is deeply concave and presents two pairs of foramina. The wings are prismatic and very high. Their lateral surfaces are extensive, face almost directly outward, and bear an auricular surface on the lower part. The anterior surface of the body of the first vertebra is extensive, depressed in its middle, and bears a prominent lip below. The anterior articular processes are large and have extensive, slightly concave facets which face upward and inward. The posterior articular processes are small. The transverse processes of the last vertebra project backward and may articulate or fuse with those of the first coccygeal. The sacral canal is strongly compressed dorso-ventrally.

[Illustration:

FIG. 116.—ATLAS OF DOG, VIEWED FROM ABOVE AND BEHIND.

_a_, Wing; _b_, dorsal arch and tubercle; _c_, ventral tubercle; _d_, intervertebral foramen; _e_, foramen transversarium; _f_, articular surface for axis. (Ellenberger-Baum, Anat. d. Hundes.) ]

[Illustration:

FIG. 117.—AXIS OF DOG, LEFT LATERAL VIEW.

_a_, Odontoid process; _b_, articular surface for atlas; _c_, transverse process; _d_; foramen transversarium; _d′_, posterior opening of _d_; _e_, spine; _f_, posterior articular process. (Ellenberger-Baum, Anat. d. Hundes.) ]

The =coccygeal vertebræ= are fully developed in the anterior part of the region. The arch is complete in the first six usually. The first three or four have well developed articular processes at each end. Behind this the posterior pair quickly disappears, and the anterior ones become non-articular and gradually reduced in size. The transverse processes of the first five or six are relatively large; behind this they quickly disappear. =Hæmal arches= (or chevron bones) in the form of a =V= or =Y= occur ventrally at the intercentral junctions of the third, fourth, and fifth usually. They transmit the middle coccygeal artery, which passes between pairs of ventral tubercles further back.

[Illustration:

FIG. 118.—SIXTH CERVICAL VERTEBRA OF DOG, LEFT VIEW.

_a_, Ventral plate, _b_, lateral part of transverse process; _c_, foramen transversarium; _d_, anterior articular process; _f_, accessory process; _g_, spinous process; _h_, articular head of body. (Ellenberger-Baum, Anat. d. Hundes.) ]

[Illustration:

FIG. 119.—FOURTH THORACIC VERTEBRA OF DOG, LEFT VIEW.

_a_, Head; _b_, glenoid cavity; _c_, facet for head of rib; _d_, transverse process; _e_, facet for tubercle of rib; _f_, mammillary process; _g_, posterior articular process; _h_, spinous process. (Ellenberger-Baum, Anat. d. Hundes.) ]

=Curves.=—A gentle curve, convex ventrally, is formed by the cervical and the anterior part of the thoracic region. The posterior thoracic and the lumbar vertebra form a second curve, concave ventrally. The sacral promontory is well marked. The sacrum and the anterior part of the coccygeal region constitute a third and more pronounced curve, concave ventrally. In long-tailed dogs the sacro-coccygeal region is somewhat =S=-shaped.

=Variations.=—Numerical variations are not common except in the coccygeal region. The number of thoracic vertebræ may be twelve or fourteen, with or without compensatory change in the lumbar region. Girard recorded a case with eight lumbar and the usual number of thoracic vertebra. Six lumbar with fourteen thoracic vertebræ have been met with. The first coccygeal sometimes unites with the sacrum.

THE RIBS

Thirteen pairs of ribs are present, of which nine are sternal and four asternal. They are strongly curved, narrow, and thick. Those in the middle of the series are the longest. The first eight or nine increase in width in their lower part. The last rib is usually floating. The costal cartilages are long and curve forward; the length and curvature of the first pair is a striking special feature.

[Illustration:

FIG. 120.—FOURTH LUMBAR VERTEBRA OF DOG, LEFT VIEW.

_a_, _b_, Articular surfaces of body; _c_, transverse process; _d_, accessory process; _e_, anterior articular process; _e′_, mammillary process; _f_, posterior articular process; _g_, spinous process. (Ellenberger-Baum, Anat. d. Hundes.) ]

[Illustration:

FIG. 121.—SACRUM OF DOG, DORSAL VIEW.

_a_, Dorsal sacral foramina; _b_, articular surface of body of first segment; _c_, _d_, anterior articular processes; _e_, wing; _f_, rudiments of articular processes; _g_, lateral part; _h_, spinous processes. (Ellenberger-Baum, Anat. d. Hundes.) ]

THE STERNUM

This is long, laterally compressed, and consists of eight sternebræ, which fuse only in exceptional cases and in extreme old age. The first segment is the longest; its anterior end is blunt-pointed and bears a short conical cartilage. It widens at the point of articulation of the first pair of cartilages. The last segment is also long, thinner than its predecessors, wide in front, and narrow behind, where it bears a narrow xiphoid cartilage.

The =thorax= is distinctly barrel-like and is not decidedly compressed anteriorly like that of the horse and ox. The inlet is oval and is relatively wide on account of the marked curvature of the first pair of ribs and cartilages.

BONES OF THE SKULL

In the following descriptions of the separate bones an intermediate type—_e. g._, a fox terrier—is selected, and the most striking differences in the brachycephalic and dolichocephalic breeds will be considered in the section on the skull as a whole.

CRANIUM

[Illustration:

FIG. 122.—BASE OF SKULL OF DOG, WITHOUT MANDIBLE.

_I_, Occipital; _II_, tympanic part of temporal; _IIa_, squamous part of temporal; _IIb_, mastoid part of temporal; _III_, sphenoid; _IV_, pterygoid; _V_, palate bone; _VI_, vomer; _VII_, malar; _VIII_, zygomatic arch; _IX_, inner wall of orbit; _X_, palatine process of maxilla; _XI_, premaxilla; _XII_, orbital cavity; _1_, _1_, tubercles above foramen magnum; _2_, foramen magnum; _3_, occipital condyle; _4_, notch between occipital condyles; _5_, condyloid fossa; _6_, hypoglossal foramen; _7_, paramastoid (styloid, jugular) process; _8_, for. lacerum and posterior opening of carotid canal; _9_, petro-occipital synchondrosis; _10_, petro-tympanic fissure; _11_, tubercle; _12_, bulla ossea; _13_, muscular process of petrous; _14_, carotid foramen; _15_, osseous Eustachian tube; _16_, postglenoid process; _17_, glenoid cavity; _18_, for. ovale; _19_, posterior opening of alar canal; _20_, external opening of parieto-temporal canal; _21_, stylo-mastoid foramen; _22_, external auditory meatus; _23_, temporal crest; _24_, zygomatic process of temporal bone; _25_, body of postsphenoid; _26_, body of presphenoid; _27_, anterior opening of alar canal; _28_, for. lacerum orbitale; _29_, optic foramen; _30_, hamulus of pterygoid; _31_, horizontal part of palate bone; _32_, perpendicular part of palate bone; _33_, median palatine suture; _34_, palato-maxillary suture; _35_, posterior nasal spine; _36_, anterior palatine foramen; _37_, palatine groove; _38_, alveolar border of maxilla; _39_, palatine process of maxilla; _40_, pterygoid process of maxilla; _41_, palatine fissure; _42_, body of premaxilla; _43_, palatine process of premaxilla; _44_, alveolar border of premaxilla; _45_, supraorbital process of frontal bone. (Ellenberger-Baum, Anat. d. Hundes.) ]

The =occipital bone= is similar in position to that of the horse. The crest, is prominent, angular, and directed backward. Just below the crest are two rough imprints or tubercles for muscular attachment. The surface below these is convex from side to side and concave from above downward. On either side, at the junction with the squamous, there is a foramen which communicates with the parieto-temporal canal. The condyles are somewhat flattened and are widely separated above; at the inner side of each is a short condyloid canal, which opens into the parieto-temporal canal. The paramastoid processes are very short. The basilar part is wide and joins the bulla ossea on either side; its lower surface is flattened and the tubercles are at the junction with the bulla. The hypoglossal foramen is small and is close to the foramen lacerum posterius; the latter is bounded in front by the bulla ossea, behind and internally by the occipital bone.

The =interparietal bone= fuses with the occipital before birth. It forms the high posterior part of the sagittal crest, and is wedged in between the two parietal bones. The tentorium osseum is thin and curved, concave ventrally. Its base concurs with the occipital and parietal bones in the formation of a transverse canal which is continuous with the parieto-temporal canals.

[Illustration:

FIG. 123.—SKULL OF DOG, DORSAL VIEW.

_I_, Occipital; _II_, parietal; _III_, frontal; _IV_, lacrimal; _V_, malar; _VI_, squamous temporal; _VII_, nasal; _VIII_, maxilla; _IX_, premaxilla; _1_, supraoccipital; _2_, interparietal; _3_, parieto-occipital suture; _4_, occipital crest; _5_, sagittal crest; _6_, parieto-frontal suture; _7_, squamous suture; _8_, parietal eminence; _9_, antero-external angle of parietal bone; _10_, frontal crest; _11_, _14_, orbital margin; _12_, supraorbital process; _13_, frontal fossa; _15_, temporal part of frontal bone; _16_, nasal process of frontal bone; _17_, frontal suture; _18_, lacrimal foramen; _19_, maxillary process of frontal bone; _20_, lacrimo-maxillary suture; _21_, frontal process of malar bone; _22_, lacrimal process of malar; _23_, zygomatic process of malar; _24_, zygomatic process of squamous temporal; _24′_, posterior end of nasal bone; _25_, nasal suture; _26_, anterior end of nasal bone; _27_, infraorbital foramen; _28_, canine tooth; _29_, cheek tooth; _30_, frontal process of maxilla; _31_, body, _32_, nasal process, _33_, palatine process of premaxilla; _34_, palatine fissure; _35_, incisor teeth. (Ellenberger-Baum, Anat. d. Hundes.) ]

The =parietal bone= is rhomboid in outline and is strongly curved. It is extensive and forms the greater part of the roof of the cranial cavity. At the junction of the right and left bones there is a prominent sagittal crest which is continued upon the frontal bones. The lower border articulates with the temporal wing of the sphenoid by its anterior part and with the squamous temporal in the remainder of its extent. The external surface enters into the formation of the temporal fossa. The internal surface is marked by digital impressions, and by grooves for the middle meningeal artery and its branches.

The external surface of the =frontal bone= is crossed by a frontal crest, which extends in a curve from the sagittal crest to the supraorbital process, and separates the frontal and temporal parts. The frontal parts of the two bones form a central depression and slope downward and forward. The supraorbital process is very short, so that the orbital margin is incomplete as in the pig. The supraorbital foramen is absent. In front there is a narrow pointed nasal part which fits in between the nasal bone and the maxilla. The orbital and temporal parts are relatively extensive. Two ethmoidal foramina are commonly present. The frontal sinus is confined to the frontal bone.

The parts of the =temporal bone= fuse early. The zygomatic process curves widely outward and forward. Its anterior part is beveled below and articulates extensively with the corresponding process of the malar. The articular surface for the condyle of the mandible consists of a transverse groove which is continued upon the front of the large postglenoid process. Behind the latter is the lower opening of the parieto-temporal canal. There is no condyle. The mastoid part is small, but bears a distinct mastoid process. The external auditory meatus is large and the canal very short, so that one can see into the tympanum in the dry skull. The India ossea is very large and is rounded and smooth; the inner side is united to the basioccipital. Above this junction and roofed in by the union of the petrous part and the basioccipital is the =petro-basilar canal= (Canalis petrobasilaris); this transmits a vein from the floor of the cranium to the foramen lacerum posterius. The latter is in reality a depression and is situated behind the bulla ossea. In its posterior part is a foramen which transmits the ninth, tenth, and eleventh cranial nerves. The =carotid canal= branches off from the petro-basilar, passes forward external to it through the inner part of the bulla ossea, and opens in front at the =carotid foramen=; it transmits the internal carotid artery. The Eustachian opening is immediately external to the carotid foramen. The muscular and hyoid processes are extremely rudimentary. The petrous part projects into the cranial cavity and forms a sharp prominent petrosal crest. The inner surface presents a deep =floccular fossa= above the internal auditory meatus. The anterior surface is also free. The anterior angle is perforated by a =canal= for the fifth cranial nerve (Canalis nervi trigemini).

[Illustration:

FIG. 124.—CRANIAL CAVITY OF DOG, AS SEEN ON SAGITTAL SECTION OF SKULL.

_I_, Roof of cranium; _II_, base of cranium; _III_, posterior wall of cranium; _IV_, anterior wall of cranium; _A_, anterior cranial fossa; _B_, middle cranial fossa; _C_, posterior cranial fossa; _a_, body of presphenoid; _a′_, body of postsphenoid; _c_, palate bone; _d_, vomer; _e_, occipital; _f_, occipital condyle; _g_, sagittal crest; _h_, frontal sinus; _h′_, cranial plate of frontal bone; _i_, cribriform plate of ethmoid bone; _i′_, ethmoidal foramen; _k_, ethmoturbinals; _l_, parietal bone; _l′_, _l″_, squamous temporal bone; _l‴_, temporal wing of sphenoid bone; _m_, sella turcica; _m′_, dorsum sellæ; _n_, optic foramen; _o_, foramen lacerum orbitale; _p_, foramen rotundum; _q_, foramen ovale; _r_, _r′_, carotid foramina; _s_, tentorium osseum; _t_, foramen lacerum; _u_, _u′_, orifices of parieto-temporal canal; _v_, condyloid canal; _w_, canal for trigeminal nerve; _x_, internal auditory meatus; _y_, _y′_, orifices of canal for inferior occipital sinus; _z_, floccular fossa. (After Ellenberger, in Leisering’s Atlas.) ]

The body of the =sphenoid bone= is flattened dorso-ventrally. The sella turcica is shallow, but the dorsum sellæ is well developed and bears =posterior clinoid processes=. A pair of =anterior clinoid processes= project back from the roots of the orbital wings. The latter are relatively small and are crossed externally by a crest, which is continued forward upon the palate bone. The temporal wings are extensive and articulate above with the parietals. Perforating the roots of the wings are the following foramina, named from before backward: The optic passes through the orbital wing. The foramen lacerum orbitale is a little lower and is at the junction of the wings. The foramen rotundum opens into the alar canal, which passes through the root of the short but wide pterygoid process. The foramen ovale is near the posterior border of the temporal wing. There is no sphenoidal sinus.

The =ethmoid bone= is highly developed. The cribriform plate is extensive, and the olfactory fossæ are very deep. The crista galli is little developed, and often incomplete. The perpendicular plate is long. The lateral masses are greatly developed and bulge upward into the frontal sinus. There are four large endoturbinals and six ectoturbinals. The lamina papyracea is extensive and forms the inner wall of the maxillary sinus. Its lower border joins the palatine process of the maxilla and the horizontal part of the palate bone. A shelf-like plate extends inward from its lower part and concurs with the similarly incurved part of the palate bone in forming the =transverse lamina= (Lamina transversalis), which divides the olfactory fundus of the nasal cavity from the naso-pharyngeal meatus.

FACE

The =maxilla= is short, but very high posteriorly. The facial crest is absent. The infraorbital foramen is over the alveolus for the third premolar. The =frontal process= fits into a deep notch between the nasal and orbital parts of the frontal bone, and the middle part of the posterior border lies along the orbital margin. There are more or less pronounced ridges, juga alveolaria, over the canine and molar teeth. The zygomatic process is short and thin; it is completely overlapped outwardly by the malar, and is perforated by a number of foramina (Foramina alveolaria). A maxillary tuberosity is not present in the adult, but there is a pointed projection, the pterygoid process, behind the last alveolus. The internal surface bears a short turbinal crest on its anterior part, behind which it is deeply concave and forms the outer wall of the maxillary sinus. The palatine process is short, wide behind, and moderately arched from side to side. The anterior palatine foramen is situated at or close to the transverse palatine suture about midway between the median suture and the alveolar border. The palatine groove is distinct. The large alveolus for the canine tooth is completed by the premaxilla. The small alveolus for the first premolar is separated from the preceding one by a small interval. The next two consist of anterior and posterior parts for the roots of the teeth. The fourth and fifth are much larger and are divided into three parts. The last is small and consists of three divisions. The infraorbital canal is short.

The body of the =premaxilla= is compressed dorso-ventrally, and contains three alveoli for the incisor teeth, which increase in size from first to third; it also completes the inner wall of the large alveolus for the canine tooth. The foramen incisivum is very small except in large skulls. The interalveolar border is wide and very short. The nasal process is wide at its origin and tapers to a sharp point behind; the anterior part curves upward, backward, and a little inward, and forms the lateral margin of the osseous nasal aperture; the posterior part extends backward a long distance between the nasal bone and the maxilla. The palatine process turns upward and outward, forming with its fellow a wide groove for the septal cartilage; the posterior end is pointed and fits into a notch between the palatine processes of the maxillæ, and supports the end of the vomer. The palatine fissure is short but wide.